#RELAY: HOW TO MAKE AUTOMATIC RELAY SWITCHER B/W TWO VOLTAGE SOURCES

#RELAY: HOW TO MAKE AUTOMATIC RELAY SWITCHER B/W TWO VOLTAGE SOURCES.

THINGS YOU NEED:

• Relay switch
• Two voltage sources
• One Diode
• Some wires
• Soldring iron

CIRCUIT DIAGRAM:

PROCEDURE:

  First of all make/sold/connect all the components according to the circuit diagram given above and make sure all the connection are clear and clean.

The arrow sign between the right-lower terminal and the right-upper terminal of the relay shows the diode.

HOW TO USE:

 Let take the example, we are living in the area where there is no continous voltage supply to our home i.e there is loadsheding hours a day, and we have bought a 12volt DC battery for our wifi router.

Now remove the pen from the charger of the router and then directly connect that charger from elecritricity plug to the AC ADPATER wires in the diagram.

Now connect 12v DC battery wires to the DC BATTERY of the diagram.

Now connect the pen taht you have removed from the router charger to the LOAD wires of the diagram and connect with router.

NOTE: Remenber to connect positive to positive and negative to negatives of the wires.

Now if the main supply voltage (AC ADAPTER) is on the relay will automatically give that voltage to router(LOAD).

BUT when electricity goes the relay switch will automatically turn ON DC battery voltage to LOAD.

So there will be automatic switching between these two voltage sources and you set aside. #ENJOY...

REHAN JAMIL PLUS

ANY PROBLEM/FEEDBACK/SUGGESTION CLICK HERE

• Tweet
• Share
• Share
• Share
• Share